Home Forums Heating and Cooling Chiller flow problem

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of rajeshkharche rajeshkharche 1 year, 9 months ago.

  • Author
    Posts
  • #6797
    Profile photo of rajeshkharche
    rajeshkharche
    Participant

    Hello Everyone,
    I have a Philips LCC that has 1.5” chilled water feed and return. The cabinet has two flat plates that are fed off the 1.5” lines. It also two 1/2’ lines that come off the 1.5” lines that feed the cold head compressor. My problem is I can’t get the rated 2 GPM I need through the two 1/2” lines that feed the cold head compressor. If I pull the 1/2” return line off where it hooks into the 1.5” line, it will flow 2.8 GPM.The overall flow by spec for the system is 24 GPM at 40 PSI, and I am right on the money.

    Any advice appreciated?

    Thanks,
    Sonal Dhake

You must be logged in to reply to this topic.

Please Share This!Share on FacebookShare on Google+Share on LinkedInTweet about this on TwitterShare on TumblrShare on StumbleUponEmail this to someone
Copyright © 2016 Tuobdog Inc. All rights reserved. | Terms of Service | Privacy Policy | Web Design & Marketing by Tuobdog SocialWeb.Marketing
Skip to toolbar